Many automatic assembly equipment will be widely used in electrical systems. It can be said that the entire operation and control of the equipment depends on the electrical system. This also has higher requirements for the electrical system of the equipment. It is seen that many enterprises actually have numbers on the drawings when installing the electrical equipment of the equipment, but the operators usually choose to omit these numbers for their own convenience. This is actually a very irresponsible approach, because drawings will not appear in the hands of future maintenance personnel. Once the equipment fails, many numbers are not clear at all, causing great trouble to the maintenance personnel. Especially when there are many connections on many lines, you simply cannot predict which connection is on that line. At this time, the staff is very much looking forward to having a number. Here we encourage all staff who install electrical systems to follow electrical drawings. Proper numbering is a very necessary job. Non-standard automation equipment

Before, I saw that some staff did not number their electrical components. Later, the control system malfunctioned, and it was seen that almost more manpower than installation was used during maintenance. In the process of light maintenance, several such electrical systems can be installed, and many other personnel are also required to cooperate, and the loss caused by the shutdown of the enterprise is even greater. Especially in today's automation equipment, the electrical system is more important because these automation equipments have higher working efficiency, and their electrical control systems are also relatively complicated. In a device using a programmable controller, if you don't have a clear number, it is difficult to deal with the failure.